Dongguan Yilian Hardware Technology Co., Ltd
15 years professional Connector accessories, water-cooled module accessories experience

What are the processes of precision hardware processing technology

1、 Precision Hardware Processing Process Flow

The precision hardware processing technology process is to order steel materials from the material supplier according to production needs. After ordering, the steel materials are cut, and after cutting, the tolerance of the four sides is tested. After the inspection is completed, small details such as small accessories can be directly taken to the punch press for milling or CNC computer processing. There are many such details in the production of eyeglass accessories and automotive parts. And making containers is almost like cutting materials, punching them, and then directly taking them for welding. After sanding, they start spraying oil, and then assembling some accessories to ship perfectly.

2、 Hardware accessories

Most hardware products are not final consumer goods. But rather as supporting products for industrial manufacturing, semi-finished products, and tools used in the production process. Only a small portion of daily hardware products are essential tools for people's daily lives. For example: screws, screwdrivers, wrenches, fishing gear, etc. Hardware accessories refer to machine parts or components made of hardware, as well as some small hardware products. It can be used alone or as an auxiliary tool.

3、 Safety operating procedures for hardware processing

During product processing. Operators must maintain the correct posture and have sufficient mental energy to cope with their work. If they feel unwell, for personal safety reasons, they must immediately leave their work post and report to the workshop supervisor or higher-level leaders. During operation, one must concentrate their thoughts, avoid casual conversations, and cooperate with each other. Operators should not operate in a state of restlessness or fatigue, in order to ensure personal safety, avoid accidents, and ensure safe operation. All employees are required to check if their clothing meets the job requirements before entering the workplace. Do not wear slippers, high heels, or clothing that may affect safety. Those with long hair must wear a safety helmet.

2. Before starting the mechanical work, check whether the moving parts have been lubricated, then start and check whether the clutch and brake are normal, and run the machine idle for 1-3 minutes. It is strictly prohibited to operate the machine if there is a malfunction.

3. When replacing the mold, first turn off the power and stop the operation of the punching machine movement department before starting to install and debug the mold. After installation and adjustment, move the flywheel by hand for two trial runs. In order to avoid unnecessary collisions between the machine and the product to be processed, the upper and lower molds must be checked for symmetry and rationality, screws for firmness, and edge rings for proper positioning.

4. It is necessary to wait for all other personnel to leave the mechanical work area and remove the debris from the workbench before starting the power supply to start the machinery.

During mechanical operation, it is strictly prohibited to reach into the working area of the slider and to use hands to take or place workpieces. When taking and placing workpieces in the die, tools that meet the standards must be used. If any abnormal noise or malfunction is found in the machinery, the power switch should be immediately turned off for inspection. After the machinery is started, one person is responsible for transporting materials and operating the machinery. Others are not allowed to press the power building or step on the foot switch board. For the safety of others, it is even more forbidden to put hands into the mechanical work area or touch the moving parts of the machinery with hands.

4、 What is an automatic lathe

Automatic lathe is a type of CNC machinery, including some CNC automatic lathes, pneumatic automatic lathes, and center of gravity automatic lathes. Its basic core is that it can automatically process the same product for a long time after certain tool positioning settings and debugging. For the processing and manufacturing of precision parts such as copper, aluminum, iron, plastic, etc., suitable accessories for processing include instruments, clocks, automobiles, motorcycles, bicycles, glasses, stationery, hardware and bathroom, electronic product parts, connectors, computers, mobile phones, electromechanical, military and other industries' small parts, especially more complex parts. Generally, machining is done on a CNC automatic lathe, which is a high-performance, high-precision, low-noise cutting machine tool that controls the machining program through a cam.