Dongguan Yilian Hardware Technology Co., Ltd
15 years professional Connector accessories, water-cooled module accessories experience

Hardware turning partsLiterally speaking, it refers to the molding of stainless steel wire piers. Stainless steel generally refers to steel that has the ability to resist corrosion from air, water, acid, alkali salts, or other media. Depending on the composition of the alloy, there is a preference for stainless steel and acid resistance. Some steels, although rust resistant, may not necessarily be acid resistant, while acid resistant steels generally have rust resistance. Stainless steel is mainly used for producing metal turning parts, which is often referred to as stainless steel in people's daily lives.

All employees are required to check if their clothing meets the job requirements before entering the workplace. Do not wear slippers, high heels, or clothing that may affect safety. Those with long hair must wear a safety helmet. When replacing the mold, the power should be turned off first, and the punching machine movement department should stop running before starting to install and debug the mold. After installation and adjustment, move the flywheel twice by hand to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the edge pressing ring is in a reasonable position. It is necessary to wait for all other personnel to leave the mechanical work area and remove the debris from the workbench before starting the power supply to start the machinery.

How to determine whether a CNC lathe is good or bad? What is the price of a CNC lathe? How to choose a CNC lathe that suits oneself? Not necessarily expensive is good, the CNC lathe that suits your own company is the best! Now let Weijingda explain in detail how to choose the CNC lathe that suits you. How much is a CNC lathe? At present, the quality of machinery in China is becoming increasingly international, with a large proportion of exports, including CNC machine tools. How much is a CNC lathe? Due to differences in origin, configuration, and functionality, as well as variations in prices purchased from factories or agents, it is necessary to consider where the purchase is made. Therefore, it is important to have a master who is knowledgeable about CNC machine tools.

The third type is inHardware turning partsThere are threaded holes drilled from the outer surface to the inner threaded surface (usually 2, distributed in a 90 degree pattern on the outer surface), which are used to screw in small diameter countersunk screws. The purpose is to apply a centripetal force to the thread to prevent the nut from loosening. At present, the high-quality nuts sold in the market are embedded with copper small pieces on the inner surface of the nut that are consistent with the thread of the nut, to avoid direct contact between the radial tightening screw and the locked thread and damage to the latter.

Service hotline: 0769-87137791